PRODUCTS - Outdoor

Instant Security, Ltd

HOME PAGE   PRODUCTS

Outdoor Products
 

Dual-Detection Motion Detector
The dual-detection motion detector can be placed up to 2000 feet away from the base unit depending on objects and structures in-between the motion detector and the base unit.  It is sensitive to moving heat (infrared radiation) and has an adjustable coverage area.  The maximum coverage area is 40 feet by 90 degrees.  It can operate normally between -4 degrees F and 122 degrees F and is weather resistant.  The 3 volt and 9 volt lithium batteries included will typically last two to three years.

          click here for set-up guide
 

Dual-Detection High Powered Motion Detector
The high powered motion detector is used in cases where you need a stronger signal between the accessory and the base unit.  The detector can be placed up to 2000 feet away from the base unit depending on objects and structures in-between the motion detector and the base unit.  It is sensitive to moving heat (infrared radiation) and has an adjustable coverage area.  The maximum coverage area is 40 feet by 90 degrees.   It can operate normally between -4 degrees F and 122 degrees F and is weather resistant.  The 3 volt and 9 volt lithium batteries included will typically last two to three years.

          click here for set-up guide
 

The LOOPTM (10 or 20 foot)
The LOOP is a sensor device that can be used indoors or outdoors.  You can think of it as an electronic bike lock that you can use to tie up your tools and equipment (such as: backhoes, generators, ladders, etc.).  If the LOOP is cut or disconnected when the base unit is armed, an instant alarm signal will be transmitted to the base unit, and onto the monitoring company, if a monitoring plan is activated.  The LOOP can be placed up to 2000 feet away from the base unit depending on objects and structures in-between the motion detector and the base unit.  The LOOP can operate normally between 0 and 120 degrees F and is completely waterproof.  The 3 volt lithium batteries that are included will typically last for about one to two years.

          click here for set-up guide
 

The RATTLERTM
The RATTLER vibration sensor can be placed up to 2000 feet away from the base unit depending on objects and structures in-between the motion detector and the base unit.  The RATTLER is sensitive to movement and vibration.  The RATTLER sensor can be placed on top of the item(s) to be protected.  It can also be attached to any metal object with the integrated magnets.  For example: on top of a stack of lumber, drywall or other building materials, on the engine cowling of a backhoe, or on top of appliances or HVAC units prior to installation.  When the base unit is armed the RATTLER will detect any movement or vibration and create an alarm condition.

          click here for set-up guide