|
PRODUCTS - Optional |
Instant Security, Ltd |
| Optional Products |
|
|
|
Extra Keychain Remote One button on / off from up to 2000 feet away! Small enough to fit on a key chain. It also has a "panic" feature (pressing the two asterisk buttons simultaneously) that will activate an instant alarm whether or not the base unit is armed. click here for set-up guide |
|
|
Liquid Level (Water) Detector The liquid level detector can be placed up to 2000 feet away from the base unit depending on objects and structures in-between the detector and the base unit. The detector consists of a transmitter housing and a tethered sensor. The housing can not be immersed in water. The sensor should be placed in a dry area at a point where you want to be alerted if the water reaches that area. The unit is supplied with a 3 volt lithium battery. |
|
|
Remote Wired Siren & Strobe Project the alarm outside. The remote siren & strobe allows you to place the warning right where you want it. If you have monitoring service activated, direct police anywhere on your site to shorten the response time. This accessory is triggered when the base unit siren and strobe go off. Constructed of strong rust free dicast aluminum and gasketed to provide weather resistance. Must be plugged into AC power. click here for set-up guide |
|
|
Remote Wireless Siren & Strobe Project the alarm outside. The remote siren & strobe allows you to place the warning right where you want it. If you have monitoring service activated, direct police anywhere on your site to shorten the response time. This accessory is triggered when the base unit siren and strobe go off. Constructed of strong rust free dicast aluminum and gasketed to provide weather resistance. Must be plugged into AC power. click here for set-up guide |
|
|
Storage Container Motion Detector Specifically designed for metal storage containers, the storage container motion detector uses a tethered transmitter to allow placement outside the metal container. This ensures a strong signal to the base unit, up to 2000 feet away from the base unit depending on objects and structures in-between the detector and the base unit. The motion detector is highly sensitive to moving heat (infrared radiation) and has a coverage area of 45 feet by 90 degrees. It can operate normally between 0 and 120 degrees F. The 3 volt lithium battery that is included will typically last for two to three years. click here for set-up guide |
|
|
Auxiliary Mobile Power System (AMPS Package) Protect without power! Perfect for jobsite protection on new projects before the power is connected. AMPS allows you to run the alarm unit for up to five days on a marine battery. The package includes: 1 DC/AC inverter - 400 Watt; battery clamps; auto shut-off protection; 1 battery charger; Shumaker 12 volt automatic 12 volt deep cycle charger. We ask that the customer supply the battery to avoid expensive shipping charges. You must use a type 29 105 AH deep cycle marine battery with the AMPS package. click here for set-up guide |
|
|
Border Guard - Dual Detection Motion Detector The Border Guard is designed to protect the exterior of a building or a fence. Border Guard is a PIR (passive infrared) motion detector which detects the heat energy emitted by humans. The detector utilizes dual beams that project 40 feet from each side of the unit. Both beams must be blocked at the same time to activate the detector. This feature eliminates the potential false alarms caused by animals in the outdoor environment. Important: The detection distance is fixed on the Border Guard. You must make sure the the Border Guard beams do not "leak" outside the property line. |
